Forum for users of Vectric products

Apr 12, 2007 · In VCarve Pro v3.1, is there a way to change the safe z height after the material is defined? I have one particular tool path that might be trouble and I wanted to add a little height …

Jan 18, 2014 · The guys at vectric worked for Delcam. Delcam cost around $7500 + support. Aspire is much easier to use and support is free. Don 01-18-2014, 01:19 PM #3 phil_o Senior …

The guys at Vectric are releasing their new versions. I was sent the new drag knife gadget to play with and test today. The tool works great and all within the cam software. Below are some …

May 22, 2019 · I just found this on the Vectric forum: You can optionally output a CSV file that in turn can be imported to Vcarve/Aspire with Paul Rowntree's CSV importer, although it requires …

Mar 3, 2020 · Vectric software DOES take into account material thickness already...so be careful of Topping Out if you don't have a Z-Prox functioning! SB3 doesn't know how thick your …

10-17-2007, 05:30 PM #3 Brian Moran Senior Member Join Date Aug 2005 Location Vectric, Alcester Posts 147 Paul, VCarve Pro will use any true type font installed on your system. Just …

Apr 3, 2015 · Been a while since i have posted anything but here go hope it make sense. Is there a way to be able to edit text without have to go back each time and fit it ba

Nov 1, 2014 · Vectric VCarv 2.0 Micheal, Thx.. will get newer version and should solve a few problems with set-up time... Much Appreciated Stewart 11-10-2014, 09:33 PM #4 gundog

Apr 27, 2007 · Forum Applications and Techniques Designing and Creating the sbp cutting file VCarvePro and PhotoVCarve Anyone have any of these problems in v carve pro?